LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2)) >> Hydraulic Valve Lash Adjuster Arm Installation

Hydraulic Valve Lash Adjuster Arm Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hydraulic Valve Lash Adjuster Arms
    GM2190735Courtesy of GENERAL MOTORS CORP.
    NOTE: Hydraulic valve lash adjuster arms should be installed in their original position.
  1. Lubricate the hydraulic valve lash adjuster arms with engine oil.
  2. Install the 16 hydraulic valve lash adjuster arms (1).