LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2)) >> Engine Front Cover and Oil Pump Installation >> Upper timing chain guide installation

Upper timing chain guide installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Upper Timing Chain Guide And Bolts
    GM2190676Courtesy of GENERAL MOTORS CORP.
  1. Install the upper timing chain guide (2).
  2. Install the 2 upper timing chain guide bolts (1) and tighten to 8 N.m (71 lb in).
  3. Remove EN-953-A:  fixing tool and EN-952:  fixing pin.
  4. Install crankshaft bearing cap tie plate hole plug and seal ring and tighten to 40 N.m (30 lb ft).