Engine Front Cover and Oil Pump Installation: Notes

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN-952: Fixing Pin
EN-953-A: Fixing Tool
EN-49977-100: Transmitter Disc Fixation
EN-49977-200: Fixing Tool

For equivalent regional tools, refer to Special Tools .

Fig 1: Engine Front Cover Bolts M6 And M10

Courtesy of GENERAL MOTORS CORP.

NOTE: Mind the guide sleeves when installing engine front cover.

Install the engine front cover (3).
Install the 13 engine front cover bolts M6 (1).
Install the 2 engine front cover bolts M10 (2).

CAUTION: Refer to Fastener Caution .

Tighten the 13 engine front cover bolts M6 to 8 N.m (71 lb in).
Tighten the 2 engine front cover bolts M10 to 35 N.m (26 lb ft).