LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2)) >> Drive Belt Removal

Drive Belt Removal

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

For equivalent regional tools, refer to Special Tools .

    Fig 1: Locking Pin And Wrench
    GM2191736Courtesy of GENERAL MOTORS CORP.
  1. Install EN-48488:  wrench (1) to the drive belt tensioner.
  2. Move the drive belt tensioner clockwise until the drive belt tensioner can be held with EN-955-2:  locking pin (2).
  3. Remove the drive belt.
scientia non olet · About LEMON Manuals