LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2)) >> Camshaft Sprocket Installation

Camshaft Sprocket Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Camshaft Sprocket, Bolt And Intake Camshaft Position Exciter Wheel
    GM2190718Courtesy of GENERAL MOTORS CORP.
  1. Install the intake camshaft sprocket (3).
  2. Install the intake camshaft position sensor exciter wheel (2) and the intake camshaft sprocket bolt (1).
  3. Install the exhaust camshaft sprocket.
  4. Install the exhaust camshaft position sensor exciter wheel and the exhaust camshaft sprocket bolt.

Tightening of camshaft sprocket bolts will be done after the engine front cover installation.

scientia non olet · About LEMON Manuals