LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2)) >> Automatic Transmission Flex Plate Removal >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-652:  Flywheel Holder

For equivalent regional tools, refer to Special Tools .

    Fig 1: Automatic Transmission Flex Plate
    GM2191962Courtesy of GENERAL MOTORS CORP.
  1. Install EN-652:  flywheel holder (1) in order to fix the automatic transmission flex plate (2).
  2. Fig 2: Automatic Transmission Flex Plate And Bolts
    GM2191963Courtesy of GENERAL MOTORS CORP.
  3. Remove the 6 automatic transmission flex plate bolts (2).
  4. Remove the automatic transmission flex plate (1).