Radiator Surge Tank Replacement (HP2)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Radiator Surge Tank (HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) . Remove air cleaner assembly. Refer to Air Cleaner Assembly Replacement . Remove the radiator surge tank inlet hose/pipe. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (Non-HP2) , Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2) . Remove the radiator surge tank outlet hose. Refer to Generator Control Module Coolant Inlet Hose Replacement . Reposition the radiator inlet hose to get access to the radiator surge tank bolts. Unclip the overflow hoses from the fan shroud.
1	Radiator Surge Tank Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Radiator Surge Tank

Callout

Component Name

Preliminary Procedures

Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
Remove air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
Remove the radiator surge tank inlet hose/pipe. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (Non-HP2) , Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2) .
Remove the radiator surge tank outlet hose. Refer to Generator Control Module Coolant Inlet Hose Replacement .
Reposition the radiator inlet hose to get access to the radiator surge tank bolts.
Unclip the overflow hoses from the fan shroud.

Radiator Surge Tank Bolt (Qty: 2)

CAUTION:

Tighten
10 N.m (89 lb in)

Radiator Surge Tank