Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)
WARNING: This page is about a different variant/trim than selected.
Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)
| Callout | Component Name |
|---|---|
| Preliminary Procedures Partially drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) . |
|
| 1 | Radiator Surge Tank Inlet Hose/Pipe TIP: Using J 38185 hose clamp pliers, reposition the radiator surge tank inlet hose/pipe clamps. Special Tools J 38185 Hose Clamp Pliers |