Starter Installation
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the starter motor to the flywheel housing.
- Install the starter motor bolts.
Tighten: Tighten the starter bolts to 78 N.m (58 lb ft).
CAUTION:
Refer to Fastener Caution
.