Exhaust Outlet Installation
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust outlet.
- Install the exhaust outlet clamp and tighten to 15 N.m (11 lb ft).
- Install the exhaust outlet to right exhaust pipe bracket bolt and tighten to 34 N.m (25 lb ft).
- Install the exhaust outlet heat shield.
- Install the exhaust outlet heat shield bolts and tighten to 10 N.m (89 lb in).
CAUTION:
Refer to Fastener Caution
.