LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1551 (Instrument Panel System Displays & Gauges) >> Repair Instructions >> Accessory Switch Replacement (with RPO SLT)

Accessory Switch Replacement (with RPO SLT)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accessory Switch (with RPO SLT)
GM1689885Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Instrument Panel Accessory Trim Plate
Refer to Instrument Panel Accessory Trim Plate Replacement (with RPO SLT) or Instrument Panel Accessory Trim Plate Replacement (without RPO SLT) .
2 Instrument Panel Accessory Switch Screws (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  2 N.m (18 lb in)

3 Instrument Panel Accessory Switch Assembly
Tip:  Disconnect the electrical connections.