Windshield Defroster Nozzle Grille Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Defroster Nozzle Grille Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the windshield side garnish moldings. Refer to Windshield Side Garnish Molding Replacement .
1	Windshield Defroster Nozzle Grille Assembly Procedure Use a flat bladed plastic trim tool in order to release the retaining clips securing the windshield defroster nozzle grille to the instrument panel. Disconnect the electrical connections. When replacing the windshield defroster nozzle grille assembly, transfer all necessary components.

Callout

Component Name

Preliminary Procedure:
Remove the windshield side garnish moldings. Refer to Windshield Side Garnish Molding Replacement .

Windshield Defroster Nozzle Grille Assembly

Procedure

Use a flat bladed plastic trim tool in order to release the retaining clips securing the windshield defroster nozzle grille to the instrument panel.
Disconnect the electrical connections.
When replacing the windshield defroster nozzle grille assembly, transfer all necessary components.