LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1088 (Interior Trim And Paneling) >> Repair Instructions >> Windshield Side Garnish Molding Replacement

Windshield Side Garnish Molding Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Viewing Windshield Side Garnish Molding Assembly
GM1962159Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedures: 
Disable the SIR system. Refer to SIR Disabling and Enabling .
1 Windshield Side Upper Garnish Molding
Tip:  Ensure the tether is attached to the molding and retainer clip.