Driver Information Display Replacement (UDK)

Fig 1: Driver Information Display (UDK)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without Start/Stop System) . Remove the instrument panel center upper molding. Refer to Instrument Panel Center Upper Molding Replacement . Remove the driver information display bezel. Refer to Driver Information Display Bezel Replacement .
1	Driver Information Display Bolt (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Driver Information Display Procedures Disconnect electrical components.

Callout

Component Name

Preliminary Procedure

Driver Information Display Bolt (Qty: 2)

CAUTION:

Driver Information Display
Procedures
Disconnect electrical components.