LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Orlando LS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Center Upper Molding Replacement

Instrument Panel Center Upper Molding Replacement

Fig 1: Instrument Panel Center Upper Molding
GM2501274Courtesy of GENERAL MOTORS COMPANY
Instrument Panel Center Upper Molding Replacement

Callout Component Name
1 Instrument Panel Center Upper Molding

Procedure

  1. Use a flat-bladed plastic trim tool to remove the instrument panel center upper molding.
  2. Disconnect the electrical connector.
  3. When replacing the instrument panel center upper molding, remove both instrument panel center air outlet. Refer to Instrument Panel Center Air Outlet Replacement .
scientia non olet · About LEMON Manuals