Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-6009: Remover and Installer Ignition Module

For equivalent regional tools, refer to Special Tools .

Fig 1: Ignition Coil Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 2 ignition coil bolts (1).

Fig 2: Ignition Coil And Remover And Installer

Courtesy of GENERAL MOTORS CORP.

Install EN-6009: remover and installer (2) and remove the ignition coil (1).