Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-652: Flywheel Holder

For equivalent regional tools, refer to Special Tools .

Fig 1: Engine Flywheel And Holder

Courtesy of GENERAL MOTORS CORP.

Install EN-652: holder (1) to hold the engine flywheel (2).

Fig 2: Engine Flywheel And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 6 engine flywheel bolts (2).
Remove the engine flywheel (1).