LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (1 Of 2)) >> Camshaft Sprocket Removal

Camshaft Sprocket Removal

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Camshaft And Intake Camshaft Sprocket Bolt
    GM2190719Courtesy of GENERAL MOTORS CORP.
  1. Loosen the intake camshaft sprocket bolt (1) while holding the hexagon of intake camshaft (2) with a wrench.
    2. Fig 2: Intake Camshaft Sprocket, Bolt And Intake Camshaft Position Exciter Wheel
    GM2190718Courtesy of GENERAL MOTORS CORP.
  2. Remove the intake camshaft sprocket bolt (1) and the intake camshaft position exciter wheel (2).
  3. Remove the intake camshaft sprocket (3).
  4. Loosen the exhaust camshaft sprocket bolt while holding the hexagon of exhaust camshaft with a wrench.
  5. Remove the exhaust camshaft sprocket bolt and the exhaust camshaft position exciter wheel.
  6. Remove the exhaust camshaft sprocket.
scientia non olet · About LEMON Manuals