Front End Upper Tie Bar Replacement

Fig 1: Front End Upper Tie Bar

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement Remove the radiator support bracket. Refer to Radiator Support Bracket Replacement Remove the radiator grille reinforcement support. Refer to Radiator Grille Reinforcement Support Replacement Remove the hood primary and secondary latch. Refer to Hood Primary and Secondary Latch Replacement
1	Headlamp and Front Bumper Fascia Mount Panel Bolt (Qty: 4) CAUTION: Refer to Fastener Caution Tighten 22 N.m (17 lb ft)
2	Front End Upper Tie Bar

Callout

Component Name

Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
Remove the radiator support bracket. Refer to Radiator Support Bracket Replacement
Remove the radiator grille reinforcement support. Refer to Radiator Grille Reinforcement Support Replacement
Remove the hood primary and secondary latch. Refer to Hood Primary and Secondary Latch Replacement

Headlamp and Front Bumper Fascia Mount Panel Bolt (Qty: 4)

CAUTION:

Tighten
22 N.m (17 lb ft)

Front End Upper Tie Bar