Water Pump Pulley Installation
WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
- Install the water pump pulley (2) to the water pump (3).
- Install the 3 water pump pulley bolts (1) with locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Tighten the 3 water pump pulley bolts (1) to 20 N.m (15 lb ft).
NOTE:
Counterhold the crankshaft balancer. The belt has to be installed for this procedure.
CAUTION:
Refer to Fastener Caution
.