LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2)) >> Timing Belt Rear Cover Installation

Timing Belt Rear Cover Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the 4 rear timing belt cover threads.
  2. Apply threadlock to the 4 NEW rear timing belt cover bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers for the recommended thread locking material.
    3. Fig 1: Timing Belt Rear Cover
    GM2026845Courtesy of GENERAL MOTORS CORP.
  3. Install the timing belt rear cover (1).
    4. CAUTION: Refer to Fastener Caution .
  4. Install the 4 timing belt rear cover bolts (2) and tighten to 6 N.m (53 lb in).
scientia non olet · About LEMON Manuals