Intake Manifold Assemble

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intake Manifold, Multiport Fuel Injection Fuel Rail, Fuel Injectors, Seals And Bolts

Courtesy of GENERAL MOTORS CORP.

Install the 4 NEW multiport fuel injector seals (4).
Install the multiport fuel injection fuel rail (2) and the fuel injectors (3) to the intake manifold (5).

CAUTION: Refer to Fastener Caution .

Install the 2 multiport fuel injection fuel rail bolts (1) and tighten to 8 N.m (71 lb in).

Fig 2: Intake Manifold, Evaporative Emission Canister Purge Solenoid Valve Bracket And Bolts

Courtesy of GENERAL MOTORS CORP.

Install the evaporative emission canister purge solenoid valve bracket (1) to the intake manifold (3).
Install the 2 evaporative emission canister purge solenoid valve bracket bolts (2) and tighten to 7 N.m (62 lb in).

Fig 3: Intake Manifold, Intake Manifold Seal And Throttle Body Seal

Courtesy of GENERAL MOTORS CORP.

Install the NEW intake manifold seal (3) to the intake manifold (2).
Install the NEW throttle body seal (1).

Fig 4: Intake Manifold And Mount

Courtesy of GENERAL MOTORS CORP.

Install the intake manifold mount (2) to the intake manifold (1) and tighten to 8 N.m (71 lb in).

Fig 5: Intake Manifold, Manifold Absolute Pressure Sensor And Bolt

Courtesy of GENERAL MOTORS CORP.

Install the manifold absolute pressure sensor (2) to the intake manifold (3).
Install the intake manifold absolute pressure sensor bolt (1) and tighten to 6 N.m (53 lb in).