LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2)) >> Engine Oil Cooler Installation

Engine Oil Cooler Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the engine oil cooler to the oil filter housing sealing surfaces.
    2. Fig 1: Engine Oil Cooler
    GM2188658Courtesy of GENERAL MOTORS CORP.
  2. Install the NEW engine oil cooler gasket (2) and the engine oil cooler (1) to the engine oil cooler housing.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the 6 engine oil cooler bolts (3) and tighten to 8 N.m (71 lb in).
scientia non olet · About LEMON Manuals