LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2)) >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the drive belt tensioner thread.
    2. Fig 1: Drive Belt Tensioner
    GM2027566Courtesy of GENERAL MOTORS CORP.
  2. Install drive belt tensioner (1).
    3. CAUTION: Refer to Fastener Caution .
  3. Install drive belt tensioner bolt (2) and tighten to 55 N.m (41 lb ft).
scientia non olet · About LEMON Manuals