Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN 6349: Locking Pin

For equivalent regional tools, refer to Special Tools .

Fig 1: Drive Belt

Courtesy of GENERAL MOTORS CORP.

Install the drive belt (1).

Fig 2: Drive Belt Tensioner And Special Tool

Courtesy of GENERAL MOTORS CORP.

Release tension to the tensioner counterclockwise (1).

NOTE: Allow tensioner to slide back slowly.

Remove EN 6349: pin (2).
Apply tension to the tensioner at projection (1) clockwise.