LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2)) >> Crankshaft and Bearing Cleaning and Inspection (1.6L LDE, LXV, 1.8L 2H0, and LUW) >> Crankshaft End Play, Check

Crankshaft End Play, Check

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Gauge Tool
    GM2190913Courtesy of GENERAL MOTORS CORP.
    NOTE: Crankshaft attached with crankshaft bearing caps.
  1. Install the GE-571-B:  gauge (1).
    1. Install in the holder on the front of the engine block.
    2. Place the dial gauge plunger against the crankshaft and adjust.
  2. Measure the longitudinal play of the crankshaft.
    1. Move the crankshaft in the longitudinal direction.
    2. Permissible crankshaft end play: 0.100-0.202 mm (0.0039-0.0080 in)
  3. Remove the GE-571-B:  gauge.
scientia non olet · About LEMON Manuals