Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-652: Automatic Transmission Flex Plate Holder

For equivalent regional tools, refer to Special Tools .

Clean the automatic transmission flex plate bolt threads.

Fig 1: Automatic Transmission Flex Plate And Holder

Courtesy of GENERAL MOTORS CORP.

Install the automatic transmission flex plate (2) and the EN-652: holder to hold the automatic transmission flex plate (2).

Fig 2: Automatic Transmission Flex Plate

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the 6 NEW automatic transmission flex plate bolts (2) and tighten the bolts to 60 N.m (44 lb ft) ± 5°.
Remove the EN-652: holder.