Instrument Panel Accessory Bezel Replacement

Fig 1: Instrument Panel Accessory Bezel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel center upper molding. Refer to Instrument Panel Center Upper Molding Replacement . Remove the front floor console stowage tray. Refer to Front Floor Console Stowage Tray Replacement .
1	Instrument Panel Accessory Bezel Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in).
2	Instrument Panel Accessory Bezel Procedure Gently pry the outer edges of the bezel to release clips. Disconnect electrical connectors. Transfer parts as needed.

Callout

Component Name

Preliminary Procedures

Remove the instrument panel center upper molding. Refer to Instrument Panel Center Upper Molding Replacement .
Remove the front floor console stowage tray. Refer to Front Floor Console Stowage Tray Replacement .

Instrument Panel Accessory Bezel Screw (Qty: 4)

CAUTION:

Tighten
2.5 N.m (22 lb in).

Instrument Panel Accessory Bezel

Procedure