Instrument Panel Center Upper Molding Replacement

Fig 1: Instrument Panel Center Upper Molding

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Instrument Panel Center Upper Molding Assembly Procedure Use a flat-bladed plastic trim tool to remove the instrument panel center upper molding. When replacing the instrument panel center upper molding, remove both instrument panel center air outlet. Refer to Instrument Panel Center Air Outlet Replacement .

Callout

Component Name

Instrument Panel Center Upper Molding Assembly

Procedure

Use a flat-bladed plastic trim tool to remove the instrument panel center upper molding.
When replacing the instrument panel center upper molding, remove both instrument panel center air outlet. Refer to Instrument Panel Center Air Outlet Replacement .