LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right engine splash shield. Refer to Engine Splash Shield Replacement - Right Side .
  2. Remove the engine drive belt. Refer to Drive Belt Replacement .
    3. Fig 1: View Of Harmonic Balancer Holder J38122-A
    GM467429Courtesy of GENERAL MOTORS CORP.
  3. Use J 38122-A  to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
  4. Remove the crankshaft balancer bolt. Discard the bolt.
    5. Fig 2: View Of Crankshaft Balancer
    GM412138Courtesy of GENERAL MOTORS CORP.
  5. Remove the crankshaft balancer.
scientia non olet · About LEMON Manuals