LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Compartment Lid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Compartment Hinge & Bolts
    GM1549897Courtesy of GENERAL MOTORS CORP.
  1. Position the rear compartment lid hinge (3) to the vehicle.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the rear compartment hinge nuts (1) to the studs on the decklid and tighten to 10 N.m (89 lb in).
  4. Install the rear compartment hinge bolts (2) to the hinge and tighten to 10 N.m (89 lb in).
  5. Adjust the rear compartment lid if necessary. Refer to Rear Compartment Lid Adjustment .