Installation Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outlet to the I/P top panel.
- Install the screws to the outlet.
- Tighten the screws.
Tighten: Tighten the screws to 2.2 N.m (19 lb in).
- Install the I/P upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
CAUTION:
Refer to Fastener Caution
.