Driver or Passenger Seat Cushion Frame Front Bracket Replacement

Fig 1: Front Seat Cushion Frame Front Bracket And Rivets

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Manual Height Adjuster) , Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Power Height Adjuster) .
1	Driver or Passenger Seat Cushion Frame Front Bracket Rivet (Qty: 2) WARNING: Use the proper eye protection when drilling to prevent metal chips from causing physical injury. Procedure Drill out both guide rivets before removing.
2	Driver or Passenger Seat Cushion Frame Front Bracket Procedure When re-installing the bracket re-riveted at the bottom of the lower cushion frame with new rivets. If replacing with a new front seat back cushion frame, transfer components as necessary.

Callout

Component Name

Driver or Passenger Seat Cushion Frame Front Bracket Rivet (Qty: 2)

WARNING:

Use the proper eye protection when drilling to prevent metal chips from causing physical injury.

Procedure
Drill out both guide rivets before removing.

Driver or Passenger Seat Cushion Frame Front Bracket

Procedure

When re-installing the bracket re-riveted at the bottom of the lower cushion frame with new rivets.
If replacing with a new front seat back cushion frame, transfer components as necessary.