Driver or Passenger Seat Cushion Frame Rear Bracket Replacement (4 Way)

Fig 1: Front Seat Cushion Frame Rear Bracket And Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Manual Height Adjuster) , Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Power Height Adjuster) .
1	Driver or Passenger Seat Cushion Frame Rear Bracket Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 4 N.m (35 lb in)
2	Driver or Passenger Seat Cushion Frame Rear Bracket Procedure If replacing with a new front seat back cushion frame, transfer components as necessary.