LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1757 (Transfer Case - BW 4485-Nr3) >> Repair Instructions - On Vehicle >> Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Cadillac Escalade EXT, 2011 Cadillac Escalade ESV, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Special Tools And Input Seal
    GM1728910Courtesy of GENERAL MOTORS CORP.
    IMPORTANT:

    It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825 .

  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Using the J 23907 (1), and J 36825  (2), remove the input seal.
scientia non olet · About LEMON Manuals