Special Tools
WARNING: This page is about a different car, the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Cadillac Escalade EXT, 2011 Cadillac Escalade ESV, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
| Illustration | Tool Number/Description |
|---|---|
| J 2619-01 Slide Hammer |
|
| J 3289-20 Holding Fixture |
|
| J 8092 Driver Handle |
|
| J 22912-B Rear Pinion and Axle Bearing Remover |
|
| J 23907 Slide Hammer with Bearing Adapter |
|
| J 26941 Bushing and Bearing Remover - 3-4 inch |
|
| J 36825-A Output Shaft Oil Seal Remover (4WD Models Only) |
|
| J 36850 Transjel Lubricant |
|
| J 42176 Universal Driver Handle - Non-Threaded |
|
| J 42738 Seal Installer |
|
| J 43484 Front Output Shaft Seal Installer |
|
| J 45124 Removal Bridge |
|
| J-45124-9 Puller Legs |
|
| J 45358 Case Spreader |
|
| J 45380 Transfer Case Rear Bushing Remover and Installer |
|
| J 45548 Mainshaft Support Bushing/Bearing Remover |
|
| J 45756 Rear Output Shaft Seal Installer |
|
| J 45757 Mainshaft Support Bushing and Bearing Installer |
|
| J 45759 Assembly Fixture |