Radiator Grille Reinforcement Support Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . |
|
| 1 | Radiator Grille Reinforcement Support Bolt (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 10 N.m (89 lb in). |
| 2 | Radiator Grille Reinforcement Support Retainer (Qty: 3) |
| 3 | Radiator Grille Reinforcement Support |