Rear Bumper Step Pad Replacement (Enclave)
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Enclave) . |
|
| 1 | Rear Bumper Step Pad Procedure Reach under the backside of the rear fascia and carefully push a small nylon wedge between the fascia and retainers. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the rear bumper step pad to gradually remove the rear bumper step pad from the rear fascia. |