Sunshade Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunshade

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement - Left Side , and Windshield Garnish Molding Replacement - Right Side . Remove the sunshade anchor. Refer to Sunshade Anchor Replacement .
1	Sunshade Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (25 lb in)
2	Sunshade Assembly Procedure Lower the front of the headliner enough to gain access to the sunshade electrical connector which is glued to the headliner. Disconnect the sunshade electrical connector.

Callout

Component Name

Preliminary Procedures

Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement - Left Side , and Windshield Garnish Molding Replacement - Right Side .
Remove the sunshade anchor. Refer to Sunshade Anchor Replacement .

Sunshade Screw (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
3 N.m (25 lb in)

Sunshade Assembly

Procedure

Lower the front of the headliner enough to gain access to the sunshade electrical connector which is glued to the headliner.
Disconnect the sunshade electrical connector.