Windshield Garnish Molding Replacement - Right Side
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . |
|
| 1 | Windshield Side Garnish Molding Bolt Hole Finish Plug (Qty: 2) |
| 2 | Windshield Side Garnish Molding Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 3 | Windshield Side Garnish Molding Assembly TIP: Disconnect the electrical connector. |