Rear Side Door Upper Molding Replacement (Acadia or Traverse)
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement (Acadia or Traverse) . |
|
| 1 | Rear Side Door Upper Molding Screw (Qty: 5)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 2 | Rear Side Door Trim Bracket |
| 3 | Rear Side Door Upper Molding Procedure Pull away from door to disengage the retainer clips. |