Center Pillar Upper Garnish Molding Replacement
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the center pillar lower garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement (Traverse) Center Pillar Lower Garnish Molding Replacement (Acadia or Enclave) . |
|
| 1 | Center Pillar Upper Garnish Molding Screw
CAUTION:
Refer to Fastener Caution . TIP: Open the access door to remove the screw. Tighten 2 N.m (18 lb in) |
| 2 | Center Pillar Upper Garnish Molding Assembly Procedure Route the seat belt through the molding prior to installing. |