LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 458 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Lumbar Support Replacement

Driver or Passenger Seat Lumbar Support Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver or Passenger Seat Lumbar Support
GM1965584Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  2. Remove the front seat lumbar control. Refer to Front Seat Lumbar Control Replacement .
1 Front Seat Lumbar Assembly Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Front Seat Lumbar Assembly
scientia non olet · About LEMON Manuals