Front Side Door Window Belt Inner Sealing Strip Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Door Window Inner Sealing Strip

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove front door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Acadia or Traverse)Front Side Door Trim Panel Replacement - Left Side (Enclave) , or Front Side Door Trim Panel Replacement - Right Side (Enclave)Front Side Door Trim Panel Replacement - Right Side (Acadia or Traverse) .
1	Front Side Door Inner Window Sealing Strip Procedure Start from the front edge of the door, pull upward on the inner window sealing strip to release it from the pinch-weld flange. Install the inner window sealing strip to the front edge of the door, press firmly onto the pinch-weld flange and work it rearward.

Callout

Component Name

Preliminary Procedures
Remove front door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Acadia or Traverse)Front Side Door Trim Panel Replacement - Left Side (Enclave) , or Front Side Door Trim Panel Replacement - Right Side (Enclave)Front Side Door Trim Panel Replacement - Right Side (Acadia or Traverse) .

Front Side Door Inner Window Sealing Strip

Procedure

Start from the front edge of the door, pull upward on the inner window sealing strip to release it from the pinch-weld flange.
Install the inner window sealing strip to the front edge of the door, press firmly onto the pinch-weld flange and work it rearward.