Driver Knee Bolster Replacement (Traverse)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Knee Bolster (Traverse)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
1	Driver Knee Bolster Screw (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Drivers Knee Bolster Assembly Procedure Disconnect the electrical connections. When replacing the drivers knee bolster, transfer all necessary components.

Callout

Component Name

Preliminary Procedure
Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .

Driver Knee Bolster Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Drivers Knee Bolster Assembly

Procedure

Disconnect the electrical connections.
When replacing the drivers knee bolster, transfer all necessary components.