LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Turn Signal/Hazard Warning Lights) >> Front Turn Signal Light Replacement

Front Turn Signal Light Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper side cover (see FRONT AIR SPOILER REPLACEMENT ).
  2. Remove the mounting screw (A) from the front turn signal light (B).
  3. Disconnect the 2P connector (C) from the front turn signal light.

    Front Turn Signal Light: 21W 

    Fig 1: Identifying Mounting Screw, 2P Connector And Front Turn Signal Light
    G06431602Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Turn the bulb socket (D) counterclockwise to remove it from the bulb (E).
  5. Install in the reverse order of removal.