Front Air Spoiler Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the front bumper.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

Remove the clips securing the air spoiler (A) from under the front bumper (B).
NOTE: To release the clips, pry up on the center pin at the notch (C).

Fig 1: Identifying Air Spoiler And Front Bumper
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull the front air spoiler back to detach the hooks (D) and remove the spoiler.
Install the front air spoiler in the reverse order of removal:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.