LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (EGR System) >> EGR Pipe Removal and Installation >> Installation

EGR Pipe Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EGR pipe to the water passage side, then tighten the nuts (A) by hand with a new gasket (B).
    Fig 1: Gasket And Bolts With Torque Specifications
    G06429600Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the EGR pipe to the TWC side, tighten the bolts (C) by hand with a new gasket (D), then torque the bolts.
  3. Torque the nuts on the water passage side.
  4. Install the cowl cover and the under-cowl panel (see COWL COVER REPLACEMENT ).
scientia non olet · About LEMON Manuals