LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt LS, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Cylinder Head) >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold (see REMOVAL ).
  2. Remove the eight ignition coils (see IGNITION COIL REPLACEMENT ).
  3. Remove the harness holder (A), and disconnect the breather hose (B).
    Fig 1: Identifying Harness Holder And Breather Hose
    G06428892
  4. Remove the cylinder head cover.
    Fig 2: Identifying Cylinder Head Cover
    G06428893
scientia non olet · About LEMON Manuals