Outside Air Temperature Sensor Replacement
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front grille cover (see FRONT GRILLE COVER REPLACEMENT ).
- Remove the outside air temperature sensor clip (A) from front bumper beam.
- Disconnect the 2P connector (A) from the outside air temperature sensor.
- Lift the tab (B) to release the lock, then remove the outside air temperature sensor (C) from the clip.
- Install the sensor in the reverse order of removal.